A.show ip interface [interface] access-lists
B.show ip access-lists interface [interface]
C.show ip interface [interface]
D.show ip access-lists [interface]
您可能感興趣的試卷
你可能感興趣的試題
A.copier
B.microwave oven
C.toaster
D.cordless phone
E.IP phone
F.AM radio
A.R1 will forward the packet out all interfaces.
B.R1 will drop this packet because this it is not a valid IP address.
C.As R1 forwards the frame containing this packet, Sw-A will add 192.168.1.255 to its MAC table.
D.R1 will encapsulate the packet in a frame with a destination MAC address of FF-FF-FF-FF-FF-FF
E.As R1 forwards the frame containing this packet, Sw-A will forward it to the device assigned the IP address of 192.168.1.255.
A.Drop the data.
B.Send the data frames to the default gateway.
C.Create an ARP request to get a MAC address for the receiving host.
D.Send a TCP SYN and wait for the SYN ACK with the IP address of the receiving host.
Refer to the exhibit.The Lakside Company has the internetwork in the exhibit.The administrator would liketo reduce the size of routing table on the Central router.Which partial routing table entry in the Central routerepresents a route summary that represents the vlans in Phoenix but no additional subnets?()
A.10.0.0.0/22 is subnetted,1 subnets D 10.4.0.0[90/20514560] via 10.2.0.2,6w0d,serial0/1
B.10.0.0.0/28 is subnetted,1 subnets D 10.2.0.0[90/20514560] via 10.2.0.2,6w0d,serial0/1
C.10.0.0.0/22 is subnetted,1 subnets D 10.0.0.0[90/20514560] via 10.2.0.2,6w0d,serial0/1
D.10.0.0.0/30 is subnetted,1 subnets D 10.2.2.0[90/20514560] via 10.2.0.2,6w0d,serial0/1
E.10.0.0.0/28 is subnetted,1 subnets D 10.4.4.0[90/20514560] via 10.2.0.2,6w0d,serial0/1
F.10.0.0.0/30 is subnetted,1 subnets D 10.4.4.4[90/20514560] via 10.2.0.2,6w0d,serial0/1
A.mismatched TKIP encryption
B.null SSID
C.cordless phones
D.mismatched SSID
E.metal file cabinets
F.antenna type or direction
最新試題
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€(gè)邏輯地址范圍?()
請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()
請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時,它的目的MAC 地址是什么?()
請參見圖示。公司路由器由于故障被更換。更換路由器之后,Education 辦公室內的主機C 和D 能夠相互ping 通,但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()
請參見圖示。當計算機A 向計算機D 發送幀時,哪些計算機會接收該幀?()
請參見圖示。哪種邏輯拓?fù)涫菍?duì)圖示網絡的準確描述?()
路由器使用哪一項信息來確定源主機和目的主機之間的路徑?()
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()