A.Drop the data.
B.Send the data frames to the default gateway.
C.Create an ARP request to get a MAC address for the receiving host.
D.Send a TCP SYN and wait for the SYN ACK with the IP address of the receiving host.
您可能感興趣的試卷
你可能感興趣的試題
Refer to the exhibit.The Lakside Company has the internetwork in the exhibit.The administrator would liketo reduce the size of routing table on the Central router.Which partial routing table entry in the Central routerepresents a route summary that represents the vlans in Phoenix but no additional subnets?()
A.10.0.0.0/22 is subnetted,1 subnets D 10.4.0.0[90/20514560] via 10.2.0.2,6w0d,serial0/1
B.10.0.0.0/28 is subnetted,1 subnets D 10.2.0.0[90/20514560] via 10.2.0.2,6w0d,serial0/1
C.10.0.0.0/22 is subnetted,1 subnets D 10.0.0.0[90/20514560] via 10.2.0.2,6w0d,serial0/1
D.10.0.0.0/30 is subnetted,1 subnets D 10.2.2.0[90/20514560] via 10.2.0.2,6w0d,serial0/1
E.10.0.0.0/28 is subnetted,1 subnets D 10.4.4.0[90/20514560] via 10.2.0.2,6w0d,serial0/1
F.10.0.0.0/30 is subnetted,1 subnets D 10.4.4.4[90/20514560] via 10.2.0.2,6w0d,serial0/1
A.mismatched TKIP encryption
B.null SSID
C.cordless phones
D.mismatched SSID
E.metal file cabinets
F.antenna type or direction
A.Send periodic updates regardless of topology changes.
B.Send entire routing table to all routers in the routing domain.
C.Use the shortest-path algorithm to the determine best path.
D.Update the routing table based on updates from their neighbors.
E.Maintain the topology of the entire network in its database.
The OSPF process has been started and the networks have been configured for Area 0 as shown in the diagram. The network administrator has several options for configuring RouterB to ensure that it will be preferred as the designated router (DR) for the 172.16.1.0 /24 LAN segment. What configuration tasks could be used to establish this preference (Choose three.)()。
A.Configure the priority value of the Fa0/0 interface of RouterB to a higher value than any other interface on the Ethernet network.
B.Change the router id of Router B by assigning the IP address 172.16.1.130/24 to the Fa0/0 interface of RouterB.
C.Configure a loopback interface on RouterB with an IP address higher than any IP address on the other routers.
D.Change the priority value of the Fa0/0 interface of RouterB to zero.
E.Change the priority values of the Fa0/0 interfaces of RouterA and RouterC to zero.
F.No further configuration is necessary.
A.ATM
B.IDS
C.IOS
D.IOX
E.IPS
F.SDM
最新試題
要將數據包發送到遠程網絡,應使用哪種設備?()
請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時,它的目的MAC 地址是什么?()
請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()
請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確?()
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()
請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述,哪兩項是正確的?()
以下哪兩種介質可提供高達1Gb/s 的帶寬?()
PC 無法連接到任何遠程網站,無法ping 通其默認網關,也無法ping 通本地網段中工作正常的打印機。以下哪項操作可以確認此PC 上的TCP/IP 協議棧是否工作正常?()
請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()