多項選擇題

Which three statements are true about implementing wireless LANs in the Company network using  Cisco devices?()

A. Antenna power is a relative value reference to dBi.
B. LWAPP allows encrypted communications between lightweight access points and WLAN  controllers.
C. Characteristics of antennas are directionality, gain, and polarization.
D. Power over Ethernet (PoE) is only available when a WLAN controller is integrated into the  network.
E. The WLAN solution Engine (WLSE) is used to control lightweight access points.
F. One of the advantages of the lightweight WLAN solution is that the devices act indepently.


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題

Under which three conditions does a client initiate roaming between wireless cells in the Company  WLAN? ()

A. The access point has broadcast too many SSIDs.
B. The wireless client has missed too many beacons from the access point.
C. The maximum data retry count, initiated by the wireless client, is exceeded.
D. The wireless client has reduced the data rate.
E. The access point has requested client reauthentication.
F. The wireless client has missed too many IAPP (Inter Access Point Protocol) updates.

2.多項選擇題

Refer to the exhibit. The wireless user is moving from right to left towards AP2. 
What are three  reasons that the wireless client would initiate roaming?()

A. The minimum data retry count from AP1 is exceeded.
B. The maximum data retry count from AP1 is exceeded.
C. The client has missed too many beacons from AP1.
D. The client data rate from AP1 has been reduced.
E. The client has received too many beacons from AP2.
F. The client data rate from AP2 has been increased.

3.單項選擇題

Refer to the exhibit. 
Which protocol establishes an optimal path to the root in a wireless mesh  network? ()

A. Adaptive Wireless Path (AWP)
B. WLAN Quality of Service (WQoS)
C. Lightweight Access Point Protocol (LWAPP)
D. 802.1Q WLAN trunking protocol
E. Layer 2 Roaming (IAPP)

4.單項選擇題

Refer to the exhibit. 
Which statement is true about the repeater access point that is deployed in  this wireless network?()

A. The repeater access point should use a different SSID than the SSID configured on the parent  access point.
B. The repeater access point reduces the throughput in half because it receives and then retransmits  each packet on the same channel.
C. The repeater access point requires a 10 percent channel overlap with channel of the root  access point.
D. The repeater access point should use a different WEP encryption method than the WEP  encryption that is enabled on the parent access point.

5.單項選擇題

In the Company wireless LAN,
 what is the function of the Service Set Identifier (SSID)?()

A. The SSID must match on both the Company client and the Company access point and provides  MAC Address Authentication to authenticate the client to the access point.
B. The SSID should be configured on the Company client site only and provides data-privacy  functions and authentication to the access point.
C. The SSID must match on both the Company client and the Company access point and provides encryption keys for authentication to the access point.
D. The SSID must match on both the Company client and the Company access point. The SSID is  advertised in plain-text in the access point beacon messages.  
E. None of the other alternatives apply

最新試題

What two things will occur when an edge port receives a BPDU?()

題型:多項選擇題

Refer to the exhibit. Which statement is true about the output?()

題型:?jiǎn)雾?xiàng)選擇題

Refer to the exhibit. Switch S2 contains the default configuration. Switches S1 and S3 both have had the command spanning-tree mode rapid-pvst issued on them. What will be the result?()

題型:?jiǎn)雾?xiàng)選擇題

Refer to the exhibit and the partial configuration of switch SW_A and SW_B. STP is configured on all switches in the network. SW_B receives this error message on the console port:00:06:34: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on FastEthernet0/5 (not half  duplex), with SW_A FastEthernet0/4 (half duplex) , with TBA05071417(Cat6K-B) 0/4 (half duplex). What would be the possible outcome of the problem?()

題型:?jiǎn)雾?xiàng)選擇題

Refer to the exhibit. What does the command channel-group 1 mode desirable do? () 

題型:?jiǎn)雾?xiàng)選擇題

Which router redundancy protocol cannot be configured for interface tracking?()

題型:?jiǎn)雾?xiàng)選擇題

Refer to the exhibit. All network links are FastEthernet. Although there is complete connectivity throughout the network, Front Line users have been complaining that they experience slower network performance when accessing the server farm than the Reception office experiences. Based on the exhibit, which two statements are true?()

題型:多項選擇題

Refer to the exhibit. STP has been implemented in the network. Switch SW_A is the root switch for the default VLAN. To reduce the broadcast domain, the network administrator decides to split users on the network into VLAN 2 and VLAN 10. The administrator issues the command spanning-tree vlan 2 root primary on switch SW_A. What will happen as a result of this change?()

題型:?jiǎn)雾?xiàng)選擇題

Refer to the exhibit. On the basis of the output of the show spanning-tree inconsistentports command, which statement about interfaces FastEthernet 0/1 and FastEthernet 0/2 is true?()

題型:?jiǎn)雾?xiàng)選擇題

What must be the same to make multiple switches part of the same Multiple Spanning Tree (MST)?()

題型:?jiǎn)雾?xiàng)選擇題