A.The command will initiate a probe with a destination IP address of 10.1.1.1
B.The command is used on the IP SLA responder and the IP SLA source
C.The command will allow only source address 10.1.1.1 to source probes
D.The command will initiate a probe with a destination Telnet port
E.The command is used to make the router a responder
F.The command will initiate a probe with a source port of 23
您可能感興趣的試卷
你可能感興趣的試題
A.Use the Cisco Auto Configuration tool
B.Use the Cisco Rollback feature
C.Automate documentation
D.Schedule documentation checks
E.Use the Cisco Configuration Archive tool
F.Require documentation prior to a ticket being closed out
A.DHCPREQUEST， DHCPOFFER， DHCPDISCOVER， DHCPACK
B.DHCPDISCOVER， DHCPOFER， DHCPREQUEST， DHCPACK
C.DHCPOFFER， DHCPACK， DHCPREQUEST， DHCPDISCOVER
D.DHCPDISCOVER， DHCPREQUEST， DHCPOFFER， DHCPACK
E.DHCPREQUE5T， DHCPDISCOVER， DHCPOFFER， DHCPACK
F.DHCPDISCOVER， DHCPACK， DHCPREQUEST， DHCPOFFER
A.Ensuring compliance with legal regulations and corporate policies
B.Troubleshooting problem reports
C.Planning for network expansion
D.Providing support to sales and marketing
E.Giving presentations to management
F.Monitoring and tuning network performance
A.Unknown destination MAC address
B.Bad cabling
C.MAC forwarding table is full
D.Port configured for half duplex
E.Port configured for full duplex
F.Network congestion
A.ff02：a：b：c：：l/64
B.2001：aaaa： 1234：456c： 1/64
C.2001：000a：lb2c：：/64
D.2fff：f：f：f：：f/64
E.ff02：33ab：l：32：：2/128
F.2001：bad：2345：a：b：：cef/128
最新試題
Match the xDSL type on the above to the most appropriate implementation on the below.
You need to configure a GRE tunnel on a IPSec router. When you are using the SDM to configurea GRE tunnel over IPsec， which two parameters are required when defining the tunnel interfaceinformation？（）
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clicking the numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible.To gain access to either the topology or the SDK click on the button to left side of the screen thatcorresponds to the section you wish to access. When you have finished viewing the topology theSDK you can return to your questions by clicking on the Questions button to the left.Which defined peer IP address an local subnet belong to Crete？（）
Which statement about PPPoA configuration is correct？（）
Authentication is the process of determining if a user or identity is who they claim to be. Refer tothe exhibit. Which statement about the authentication process is correct？（）
Drag the IOS commands from the left that would be used to implement a GRE tunnel using the10.1.1.0.30 network on interface serial 0/0 to the correct target area on the right.
IPSec VPN is a widely-acknowledged solution for enterprise network. Which three IPsec VPNstatements are true？（）
A new router was configured with the following commands：The configuration above was found on an Internet Service Provider’s （ISP） Multiprotocol LabelSwitching （MPLS） network. What is its purpose？（）
Drag each element of the Cisco IOS Firewall Feature Set from the above and drop onto itsdescription on the below.
Drag and drop each management protocol on the above to the correct category on the below.