A.The dsl operating-mode auto command is required if the default mode has been changed
B.The ip mtu 1496 command must be applied on the dialer interface
C.The encapsulation ppp command is required
D.The ip mtu 1492 command must be applied on the dialer interface
您可能感興趣的試卷
你可能感興趣的試題
As a network engineer， study the exhibit carefully. Router Net is unable to establish an ADSLconnection with its provider. Which action would correct this problem？（）
A.On the Dialer0 interface， add the pppoe enable command
B.On the Dialer0 Interface， add the ip mtu 1496 command
C.On the ATM0/0 interface， add the dialer pool-member 1 command
D.On the ATM0/0 interface， add the dialer pool-member 0 command
Router NetworkTut is configured as shown below：
Given the above configuration， which statement is true？（）
A.This device is configured as a PPPoE client
B.This device is configured as a PPPoA client
C.This device is configured as RFC 1483/2684bridge
D.This device is configured an an aggregation router
A.PPPoE with the 827 configured as a bridge
B.PPPoE with the 827 configured as the PPPoE client
C.PPPoA
D.RFC 1483 Bridged with the 827 configured as the PPPoE client
E.RFC 1482 Bridged with the 827 configured as a bridge
A.The IP inspection rule can be applied in the inbound direction on the secured interface
B.The IP inspection rule can be applied in the outbound direction on the unsecured interface
C.The ACL applied in the inbound direction on the unsecured interface should be an extendedACL.
D.For temporary openings to be created dynamically by Cisco IOS Firewall， the access-list for thereturning traffic must be a standard ACL
Study this exhibit carefully. What information can be derived from the SDM firewall configurationdisplayed？（）
A.Access-list 101 was configured for the trusted interface， and access-list 100 was configured forthe untrusted interface
B.Access-list 100 was configured for the trusted interface， and access-list 101 was configured forthe untrusted interface
C.Access-list 100 was configured for the inbound direction， and access-list 101 was configured forthe outbound direction on the trusted interface
D.Access-list 100 was configured for the inbound direction， and access-list 101 was configured forthe outbound direction on the untrusted interface
最新試題
Drag and drop each management protocol on the above to the correct category on the below.
Which three statements accurately describe IOS Firewall configurations？（）
cisco ios command to interface dialer 0
Match the xDSL type on the above to the most appropriate implementation on the below.
You need to configure a GRE tunnel on a IPSec router. When you are using the SDM to configurea GRE tunnel over IPsec， which two parameters are required when defining the tunnel interfaceinformation？（）
Drag and drop the xDSL type on the above to the appropriate xDSL description on the below.
Drag the protocols that are used to distribute MPLS labels from the above to the target area on thebelow.（Not all options will be used）
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible. To gain access to either thetopology or the SDK click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDK you can return to yourquestions by clicking on the Questions button to the left.Which IPSec rule is used for the Olympia branch and what does it define？（）
Network Topology Exhibit：Configuration Exhibit：NET（config）# access-list 112 deny icmp any any echo logNET（config）# access-list 112 deny imp any any redirect logNET（config）# access-list 112 deny icmp any any mask-request logNET（config）# access-list 112 permit icmp any 10.1.1.0 0.0.0.255NET（config）# interface Fa0/1NET（config-if）# ip access-group 112 inYou work as a network administrator at networkTut.com， study the exhibit carefully. Theconfiguration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However， the configurationis incorrect. On the basis of the information in the exhibit， which configuration option wouldcorrectly configure router NET？（）
Drag and drop each function on the above to the hybrid fiber-coaxial architecture component that itdescribes on the below.