A customer has 2 E1s to add between far-end nodes in an SNCP ring.
What type of circuit should you recommend？ （）
A. LO-PATH circuits
B. HO-PATH circuits
C. 1：1 protection circuits
D. 1：N protection circuits
E. LO-TUNNEL tunnel circuits
您可能感興趣的試卷
你可能感興趣的試題
A. signal fail， signal degrade， manual switch
B. signal degrade， signal fail， manual switch
C. protection lockout， manual switch， path AIS
D. forced switch， manual switch， signal degrade
E. protection lockout， manual switch， forced switch
A. LEX
B. HDLC
C. GFP-F
D. PPP/BCP
You are provisioning an E-1 circuit on an ONS 15454 MS-SPRing configuration and XC-VXL-10G card. Each VC-12 connection must also terminate via the VC-3 matrix.
How many VC-3 ports remain after this circuit is created， assuming no other circuits？（）
A. 92
B. 93
C. 94
D. 95
E. 96
A. 1+1 is based on APS， while 1：1 is based on IPS.
B. 1：1 is used in SNCP switching， while 1+1 is used in MS-SPRing switching.
C. 1+1 sends signals on Working and Protect paths， while 1：1 sends signals only on Working path.
D. 1+1 sends signals on Working path ONLY， while 1：1 sends signals on both Working and Protect paths.
A. 10
B. 32
C. 64
D. 84
E. 96
最新試題
What are two major differences between MS-SPRing and SNCP？（）
The dispersion of a non-zero dispersion shifted fiber is 6 ps/nm*km at 1550 nm and 10 ps/nm*km at 1610 nm. What is the minimum dispersion compensation required if an L-Band DWDM signal travels through 200 km of fiber and has a dispersion tolerance of 1800 ps/nm？（）
What is the phenomenon called where different wavelengths of light travel at different speeds？（）
In the OSNR model for EDFA amplifiers， SNR OUT = 1/（1/SNR IN + FhvB/P IN ）， what does SNR IN represent？（）
What is an advantage of an externally modulated laser over a directly modulated laser？ （）
If node 2 is accepting line timing from node 1， node 2 will send （） to node 1 as its SSM messge.
Given the formula： （Fiber Attenuation * Km） + （Splice Attenuation * # of Splices） + （Connector Attenuation * # of Connectors） + （Optical Fiber or OADM） + Buffer（Fiber aging）） With regard to SONET/SDH optical calculations， what will the given formula provide？（）
Which three technologies are used to reduce chromatic dispersion accumulation in fiber-optic transmission systems？（）
Which is a legitimate bandwidth matched pair？（）
What are three relevant design considerations when using the 15216 EDFA？（）