A.average signal strength that is greater than -67 dBi
B.cell overlap of 15 to 20 percent
C.uneven wireless coverage
D.absence of coverage holes
您可能感興趣的試卷
你可能感興趣的試題
A.more access points than a data network
B.fewer access points than a data network
C.less SNR than a data network
D.specific relative access point placement
A.omnidirectional
B.patch
C.Yagi
D.sector
E.parabolic dish
A.Alternate polarization between colocated antennas
B.Cross-polarize antennas between endpoints
C.Install an RF-shielded box around the antennas
D.Increase the distance between the antennas
A.-65 dBm
B.-67 dBm
C.-69 dBm
D.-70 dBm
A.PNG
B.JPEG
C.GIF
D.BMP
E.PICT
F.TIFF
最新試題
Which three items does the Cisco WCS Planning Tool Generate Proposal Report provide?()
Cisco recommends a decibel referenced to 1 milliwatt signal level for the coverage cell edge at thepredetermined data rate that is needed to support the VoWLAN device and call capacityrequirements. What is that signal level value for Cisco Unified Wireless IP Phones 7920, 7921G, and7925G?()
Which two methods can be used to prevent or reduce RFI from colocated directional antennas()
When planning for VoWLAN capacity during a site survey, how many simultaneous calls can beestimated per 5 GHz channel?()
When conducting a wireless voice site survey, which two sizing considerations exist for thecoverage cell?()
How should the transmit power on an access point and client each be set during a site survey?()
According to the following statement, can you tell me which term is described?()It is the air return for an air conditioned system. In most buildings, the area above a drop ceiling orunder a raised floor is used as the air return (source of air) for the air conditioning. Those dropceiling and raised floors are also where wire is often installed. If wire and cable is installed in a dropceiling or raised floor, it is out of sight. If that cable were burning, it would give off toxic fumes.These would be fed to the rest of the building by the air conditioner. As a result, people could beinjured even though they are a long way from the fire.
What does a Cisco Unified Wireless IP Phone 7921G deployment require()?
How is attenuation measured?()
The Cisco Aironet 1140 Series Access Point draws 12.95 W at the power source. However, whenusing a long Ethernet cable, the device can draw up to how much additional wattage?()