A.system monitoring
B.security administration
C.operations setup
D.problem management
您可能感興趣的試卷
你可能感興趣的試題
On a cisco 1000 series controller-based access point，the alarm led is flashing red，but the other leds are off.
What is this access point indicating？（）
A.its ip address already exists.
B.it is operating normally.
C.it requires a code upgrade.
D.it has lost contact with the controller.
A.admin
B.users assistant
C.system monitoring
D.power users
E.administrators
F.network operator
Clients using cisco-leap and eap-fast authentication are having no problems logging on to The wireless network， but clients using peap are failing to log on.
Which situation would result in this type of problem？（）
A.posture validation has not been enabled.
B.the aaa server is set to accept both ms-chap v2 and gtc for peap authentication.
C.clients and server are not using certificates.
D.clients have been set to validate the server identity.
A.3
B.6
C.4
D.1
A.create a more effective sales strategy for partners.
B.reinforce customer confidence in partners selling products.
C.provide a consistent， repeatable， and proven method to ensure the network solution that is deployed delivers upon the customer’s goals for reliability and availability.
D.maximize the number of services required to support advanced technologies.
E.more clearly define the roles of account managers， systems engineers， and field engineers.
最新試題
You want to dynamically assign users to an 802.1Q VLAN as a result of their authentication. Inorder to accomplish this.Which two IETF RADIUS attributes should you configure on the CiscoSecure ACS？ （）
You are configuring an RF group of controllers that coordinate Radio Resource Management calculations.What is the maximum number of WLAN controllers that you can add？（）
If it is properly deployed， a controller-based access point is capable of monitoring all VLANs on anetwork when you select which of the following modes from the AP Mode drop-down menu onthe controller？（）
A client roams from H-REAP AP1 to H-REAP AP2. The client is unable to associate to H-REAP AP2.H-REAP AP2 has six other clients associated to it， which continue to pass traffic.What has causedthis problem？（）
What is the maximum number of wireless controllers that the highest-end Cisco WCS server canmanage？（）
You are trying to change the polling parameters used by the location manager via the Cisco WCS，and your request is being denied. What is wrong？（）
You review the Failed Attempts logs on an AAA server and find： "unknown network access servererror." Which failure could produce this error？（）
A mobility group is created by a Cisco WLCM and 4402 Series Wireless LAN Controller. A client thatis anchored on the Cisco WLCM roams to an access point on the 4402 controller. You then run adebug command on the 4402 controller.Which message would best describe the establishment ofthe tunnel from the foreign controller’s perspective？（）
On a Cisco Aironet 802.11 a/b/g wireless LAN client adapter，the status LED and activity LED are alternating on and off.What does this indicate？（）
Which of the following commands on the wireless interface of a Cisco 3845 Integrated Service Router allows the SSID to broadcast？（）