One of your customers has decided to deploy location-based services in addition to existing wireless services. the customer requires that the additional access points to be deployed in
monitor-only modE.
The most likely reason for this requirement is that the customer has which of these existing wireless devices？（）
A.data collection
B.802.11b/g voip
C.802.11b and g clients
D.rfid tags
您可能感興趣的試卷
你可能感興趣的試題
A.igmp snooping
B.wmm
C.qos element for wireless phones
D.avvid priority mapping
A.systems integration
B.skill assessment
C.systems acceptance testing
D.wireless check
E.project close out
When optimizing a standalone point-to-multipoint bridge installation with eight non-root bridges
Which of the following rts threshold and cwmin settings would be correct for the non-root bridges？（）
A.rts threshold = 1，cwmin = 4
B.rts threshold = 4000，cwmin = 5
C.rts threshold = 4000，cwmin = 3
D.rts threshold = 1，cwmin = 5
You review the failed attempts logs on an aaa server and find： "unknown network access server error."
Which failure could produce this error？（）
A.aaa client and aaa server handshake failure
B.supplicant authentication failure
C.wrong password used by the supplicant
D.failure of the wireless client and aaa server handshake
During the installation of the cisco wcs version 4.0，an error occurs.
Where would you look for the installation log，in order to learn more about this error？（）
A.at the root of the installation drive
B.in the cisco wcs installation directory
C.on the desktop of the server
D.in the cisco wcs\logs directory
最新試題
You are troubleshooting a problem with a Cisco 7920 wireless IP phone that is causing the phoneto drop calls. The problem appears to be roaming bandwidth issue. In order to verify what kind ofissue it is， you decide to increase the bandwidth reserve for roaming on the WLAN controller tomaximum.What level do you set the bandwidth to？（）
Which of the following parameter sets must be configured on the Cisco Wireless Location Appliance？（）
You have been called upon to add location-based services into an existing controller-basedwireless design which primarily encompasses handheld devices such as barcode scanners and Cisco7920 wireless IP phones.In which mode should you deploy the additional access points to achievethe density required without excessive co-channel interference？（）
Which of the following accurately represents the functionality of a lightweight access point configured to operate in sniffer AP mode？（）
You are using ADU and are authenticated and associated to an access point. However， you are unable to obtain an IP address.Which of these has caused this problem？（）
You review the Failed Attempts logs on an AAA server and find： "unknown network access servererror." Which failure could produce this error？（）
Static WEP is configured on the access point. You are authenticated and associated to the accesspoint but are unable to obtain an IP address.Which of the following will cause this problem？（）
A Cisco WCS version 4.0 has been installed on a server with a dual Pentium 3.0 GHz processor，4GB RAM， and an 80 GB hard drive. A location appliance has been incorporated into the networkand is being monitored by the Cisco WCS. There are 3000 devices to be tracked but not all of themare being tracked on the Cisco WCS.What can be done to correct the problem？（）
Which of the following commands on the wireless interface of a Cisco 3845 Integrated Service Router allows the SSID to broadcast？（）
When configuring a WLAN controller for a voice application using Cisco 7920 wireless IP phones，which two general control settings should you select？（）