A co-worker is developing an implementation plan for a design that uses OSPF 2 and RIPv2 routing domains, with two routers redistributing between the two domains.The co- worker asks your help in choosing how to prevent domain loops by setting administrative distance.
Assuming all other related settings use defaults, which of the following would solve the domain loop problem?()
A. The distance ospf intra - area 80 inter - area 80 OSPF subcommand
B. T he distance ospf external 80 OSPF subcommand
C. The distance ospf intra - area 180 inter - area 180 OSPF subcommand
D. The distance ospf external 180 OSPF subcommand
您可能感興趣的試卷
你可能感興趣的試題
A network includes a RIPv2 domain, an EIGRP domain, and an OSPF domain. Each pair of routing domains has multiple routers redistributing routes between the p air of domains. The design requires that the redistribution configuration avoid matching based on prefix/length because of the trouble in maintaining such configurations.
Which one of the following tools can be used in all three routing domains to attem pt to prevent domain loops?()
A. Setting route tags
B. Setting the default administrative distance differently for internal and external routes
C. Setting administrative distance differently per route
D. Setting metrics much higher for all ext ernal routes than for all internal routes
A.EIGRPinternal:90
B.OSPFexternal:110
C.EIGRPexternal:90
D.RIP:120
E.OSPFinternal:110
Router R1 is redistributing between two OSPF processes. Given the configuration shown, which includes all commands in the route map named fred, which of the following answers is true regarding the redistribution into OSPF process 1?()
router ospf 1
redistribute ospf 2 external 2 route - map fred
!
route - map fred permit 10
match ip address 1
set metric - type type - 1
A. No routes are redistributed because a route cannot be both E1 and E2.
B. Only OSPF E2 routes in the OSPF 2 domain will be considered for redistribution.
C. Inside the OSPF 2 domain, any formerly E2 routes will become E1 routes.
D. Routes permitted by ACL 1 will be redistributed, regardless of whether the routes are E1 or E2 routes.
On Router R1, process EIGRP 1 is redistributing routes from process OSPF 2, calling route - map fred with the redistribute ospf 2 command. R1 has learned intra - area routes for 10.1.1.0/24 and 10.1.2.0/24 in part due to the Type 2 LSAs known for each subnet. The route map filters route 10.1.1.0/24 and allows 10.1.2.0/24 througH.
Which of the following co mmands on router R1 list subnet 10.1.1.0/24?()
A. show ip route
B. show ip eigrp topology
C. show ip ospf topology
D. show ip eigrp topology 10.1.1.0/24
Router R1 refers to route - map fred when redistributing from EIGRP into OSPF. The entire route - map is listed next. Which of the following answers must be true based on the configuration as shown?()
route - map fred deny 10
match ip address one
route - map fred deny 20
match ip address two
route - map fred permit 100
A. The third route map clause will allow any routes not already filtered by the first two clauses
B. R outes permitted by ACL "two" will be redistributed
C. Routes denied by ACL "one" will be redistributed
D. All routes will be filtereD
最新試題
Which of the following must match for two directly connected routers running OSPF to establish a neighbor adjacency?()
Which of the following answers lists a multicast IPv6 address?()
Router R1 currently has no configuration related to IPv6 or IPv4. The following configuration exists in a planning document, intended to be used to copy/paste into Router R1 to enable RIPng and IPv6 on interfaces F0/0 and S0/0/0. No other related configuration exists. Which of the following is true about RIPng on R1 after this configuration has been pasted into R1?()ipv6 unicast- routinginterface f0/0ipv6 rip one enableipv6 address 2000::1/64interface s0/0/0ipv6 address 2001::/64 eui - 64ipv6 rip one enable
Router R1 currently has no configuration related to IPv6 or IPv4. The following configuration exis ts in a planning document intended to be used to copy/paste into Router R1 to enable EIGRP for IPv6 on interfaces F0/0 and S0/0/0. No other related configuration exists. Assuming F0/0 and S0/0/0 reach an up/up state, which of the following is true about EIGRP for IPv6 on R1 after this configuration has been pasted into R1?()ipv6 router eigrp 1ipv6 unicast- routinginterface f0/0ipv6 address 2000::1/64ipv6 eigrp 1interface s0/0/0ipv6 address 2001::/64 eui - 64ipv6 eigrp 1
An engineer is trying to summarize the following networks using the "ip summary- address eigrp"command:10.8.88.0/2510.8.89.48/2910.8.64.96/27Which network and subnet mask below would be the smallest EIGRP summary address to include all three subnets?()
Router R1, a branch router, connects to the Internet using DSL. The engineer plans to use a configuration with a dialer interface. The answers list a feature and interface on which the feature could be configured.Which combinations accurately describe the interface under which a feature will be configured?()
An engineer is reviewing another engineer's sample configuration for a GRE tunnel used to pass IPv6 traffiC. The tunnel ha s not yet been configured on the router.Which of the following commands is not required for the configuration to pass IPv6 traffic?()
Which of the following answers lists either a protocol or function that can be used by a host to dynamically learn its own IPv6 address?()
Router R1 sits at an Enterprise branch office, using both the Internet and a leased line to another Enterprise router for its two connectivity options back into the rest of the Enterprise network. The engineer planning for this branch decided to use the leased line for all Enterprise traffic, unless it fails, in which case the Internet connection should be used to pass traffic to the Enterprise.Which of the following is most likely to be useful on the branch router?()
An Enterprise rou ter, Ent1, displays the following excerpt from the show ip bgp command. ENT1 has an eBGP connection to an ISP router with address 3.3.3.3 and an iBGP connection to a router with address 4.4.4.4. Which of the following is most likely to be true?()Network Next Hop Metric LocPrf Weight Path*> 3.3.3.3 0 0 1 1 1 1 218 i