For the accompanying router output, which of the following statements describes the stat e that neighbor 172.16.254.3 is in?（）
A. The router will not accept connections from the peer.
B. BGP can exchange routing information in this state.
C. The router is listening on its server port for connection requests from the peer.
D. The router ha s sent out an active TCP connection request to the peer.
您可能感興趣的試卷
你可能感興趣的試題
During BGP configuration on a router that has peered with other BGP speakers, the BGP command aggregate-a ddress 172.32.0.0 255.255.252.0 is issued. However, the peers do not receive this aggregate network in BGP advertisements. Also, the router does not have this aggregate network in its BGP table.
Which option indicates a possible reason this command did not cause the router to advertise the aggregate network to its peers?（）
A. Interface NULL 0 is likely shutdown.
B. The next hop IP address must be a loopback address.
C. The BGP command no auto - summary is missing.
D. The BGP command no synchronization is missing.
E. Subnets of 172.32.0.0/22 do not exist in the BGP table.
F. The IGP running on this router does not have network 172.32.0.0/22 installed.
Refer to the exhibit. Router RT - 1 and router RT - 2 both advertise network 131.25.0.0/16 to router
RT - 3 via internal BGP. What is the reason that router RT - 3 chose router RT - 1 as its best path to
network 131.25.0.0/16.（）
A. It has a better router ID
B. It advertises a lower autonomous system
C. It advertises t he best AS - path
D. It advertises the best local preference
E. It advertises the best origin code
F. It advertises the best MED
Refer to the exhibit. Router RT - 1 chooses one path to network 198.133.219.0/24. Indicate the reason Router RT - 1 choos es this "best" path. （）
A. In making its decision about the best path, RT - 1 gives precedence to the BGP MED values.
B. RT - 1 prefers internal BGP routes.
C. In making its decision about the best path, RT - 1 gives precedence to the origin code.
D. In makin g its decision about the best path, RT - 1 prefers the IGP metrics.
E. IP address 128.107.254.2 is lower than 128.107.255.2.
F. IP address 128.107.2.2 is lower than 128.107.255.2.
Refer to the exhibit. On the basis of the configuration that is provided, how would the BGP updates that come from router R1 be replicated inside autonomous system 65200？（）
A. All BGP updates that are received on router R 2 will be sent to routers R3 and R4. Routers R3 and R4 will then forward those BGP updates to router R5
B. None of the BGP updates that are received on router R2 will ever be received by router R5
C. All BGP updates that are received on router R2 will not be sent to routers R3 and R4
D. All BGP updates that are received on router R2 will be sent directly to router R5
A. 228.10.10.7
B. 229.11.10.7
C. 229.138.10.7
D. 229.138.10.8
E. 228.10.10.8
F. 228.10.138.7
最新試題
Which of the following IPv6 tunneling mechanisms support IPv6 IGP routing protocols?（）
Router R1 has the following configuration. Assuming R1's F0/0 interface has a MAC address of 0200.0011.1111, what IPv6 addresses will R1 list for interface F0/0 in the output of the show ipv6 interface brief command?（）interface f0/0ipv6 address 2345:0:0:8::1/64
Router R1 has two LAN interfaces and three serial interfaces enabled for IPv6. All the inte rfaces use link local addresses automatically generated by the router.Which of the following could be the link local address of R1's interface S0/0?（）
An enterprise has plans to start adding IPv6 support. The initial deployment requires support from some IPv6 - only device s that need to access servers that support only IPv4.Which of the following tools would be most appropriate?（）
Which of the following answers lists a multicast IPv6 address?（）
Which of the following must match for two directly connected routers running OSPF to establish a neighbor adjacency?（）
The following output occurs on Router R1 , which runs both EIGRP for IPv6 and OSPFv3, with redistribution from EIGRP into OSPF configured with the redistribute eigrp 1 metric 25 command. Interface S0/0/1 has been enabled for EIGRP ASN 1. Which of the following should be true of redistribution in this case?（）D 2000::/64 [90/1422516]via FE80::213:19FF:FE7B:5026, Serial0/0/1C 2000:0:0:1::/64 [0/0]via Serial0/0/1, directly connectedL 2000::1:213:19FF:FE7B:5004/128 [0/0]via Serial0/0/1, receive
Router R1 currently has no configuration related to IPv6 or IPv4. The following configuration exists in a planning document, intended to be used to copy/paste into Router R1 to enable OSPFv3 on interfaces F0/0 and S0/0/0. No other related configuration exists. Assuming F0/0 and S0/0/0 reach an up/up state, which of the following is true about OSPFv3 on R1 after this configuration has been pasted into R1?（）ipv6 router ospf 1ipv6 unicast- routinginterface f0/0ipv6 address 2000 ::1/64ipv6 ospf 1 area 1interface s0/0/0ipv6 address 2001::/64 eui - 64ipv6 ospf 1 area 0
Router R1, a branch router, connects to the Internet using DSL. Some traffic flows through a GRE and IPsec tunnel, over the DSL connection, and into the core of an Enterprise network. The branch also allows local hosts to communicate directly with public sites in th e Internet over this same DSL connection.Which of the following answers defines how the branch NAT config avoids performing NAT for the Enterprise directed traffic but does perform NAT for the Internet - directed traffic?（）
The following configura tion exists on a router on one end of an IPv6 tunnel. Which type of tunnel is created by this configuration?（）interface loopback 1ip address 1.1.1.1 255.255.255.255interface tunnel 2ipv6 address 2000::1::/64tunnel source loopback 1tunnel destina tion 2.2.2.2tunnel mode ipv6ipipv6 eigrp 1