Study the Exhibit below carefully:
London#show vtp
VTP Version: 2
Configuration Revision: 0
Maximum VLANs supported locally: 64
Number of existing VLANs: 5
VTP Operating Mode: Client
VTP Domain Name: London
VTP Pruning Mode: Disabled
VTP V2 Mode: Disabled
VTP Traps Generation: Disabled
Based on the information given above, what is the VTP function of this particular switch?（）
A. Learn and save VTP configuration in the running configuration.
B. Create and change VLANs.
C. Forwards information about VTP configuration.
D. VTP is disabled on this device.
E. VTP is not saved to NVRAM.
您可能感興趣的試卷
你可能感興趣的試題
You are a senior network administrator at TestKing and your trusty junior administrator tells you that he failed his task of adding VLAN 50 to a Catalyst switch in the network. You enter in the 'show vtp status' command and get this output:
TK2# show vtp status
VTP Version :2
Configuration Revision :7
Maximum VLANs supported local :68
Number of existing VLANs :8
VTP Operating Mode :Client
VTP Domain Name :corp
VTP Pruning Mode :Disabled
VTP V2 Mode :Disabled
VTP Traps Generation :Disabled
MD5 digest :0x22 0xF3 0x1A
Configuration last modified by 172.18.22.15 at 5-28-03 1t:53:20
What commands must be issued on this switch to add VLAN 50 to the database?（）
A. TK2(config-if)# switchport access vlan 50
B. TK2(vlan)# vtp server
C. TK2(config)# config-revision 20
D. TK2(config)# vlan 50 name Tech
E. TK2(vlan)# vlan 50
F. TK2(vlan)# switchport trunk vlan 50
There are 2 switches in the Testking LAN, with no routers. Ports 1, 2 & 3 are assigned to VLAN 1 in switch 1 and 2 and ports 4, 5 & 6 are assigned to VLAN 2 in both switches. These two switches are connected together via a trunked link.
Which of the conditions below would verify trunk and VLAN operation?（）
A. Host 1 on VLAN 1 can ping Host 2 on VLAN 1
B. Host 1 on VLAN 1 can ping Host 4 on VLAN 2
C. Host 1 on VLAN 1 can not ping Host 2 on VLAN 1
D. Host 4 on VLAN 2 can not ping Host 1 on VLAN 1
E. Host 4 on VLAN 2 can ping Host 2 on VLAN 2
A TestKing.com technician is troubleshooting connectivity problems between two routers that are directly connected through the serial line. The technician notices that the serial line is up but cannot see any neighbors displayed in the output of the show cdp neighbors command.
In which OSI layer is the problem most likely occurring?（）
A. Physical
B. Data link
C. Network layer
D. Transport layer
E. Application layer
A.Application
B.Presentation
C.Session
D.Transport
E.Network
F.Data-Link
A. Application
B. Presentation
C. Session
D. Transport
E. Internet
F. Data Link
G. Physical
最新試題
An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? （）
Five minutes after issuing the show running-config command, a technician enters the command again and notices that several access list statements have been altered. Because of this, the technician believes that the router is being configured by an unknown person through Telnet. Before changing the router passwords, the technician would like to discover if anyone is connected to the router by Telnet and stop them from making further changes.Which commands will accomplish these options?（）
What is the subnetwork address for a host with IP address 201.100.5.68/28?（）
The following access list was applied outbound on he E0 interface connected to the 192.168.1.8/29 LAN:access-list 123 deny tcp 192.168.1.8 0.0.0.7 eq 20 anyaccess-list 123 deny tcp 192.168.1.9 0.0.0.7 eq 21 anyWhat effect will this access list have?（）
What should the configuration register value be after successfully completing the password recover procedure and returning the router to normal operation? （）
Which characteristics are representative of a link-state routing protocol?（）
A Router with a BRI/T interface will be used for an ISDN Connection what other ISDN device is required to complete this connection? （）
Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational? （）
A network host is configured as follows: Host IP address: 192.168.16.183 Subnet mask: 255.255.255.224 Default gateway: 192.168.16.190 Which of the following statements describe the network to which this host is attached?（）
Which connections allow the use of full-duplex Ethernet?（）