A. use ISL encapsulation
B. use 802.1q encapsulation
C. set ISL to desirable and auto with encapsulation negotiate to support ILS protocol negotiation
D. use VTP server mode to support dynamic propagation of VLAN information across the network
E. set DTP to desirable and desirable with encapsulation negotiate to support DTP protocol negotiation.
您可能感興趣的試卷
你可能感興趣的試題
A. to ensure a loop-free topology
B. to protect against user-side loops
C. in order to support business applications
D. because of the risk of lost connectivity without STP
E. for the most deterministic and highly available network topology
A. when HSRP is not supported by the design
B. when multiple vendor devices need to be supported
C. when preempt tuning of the default gateway is needed
D. when a robust method of backing up the default gateway is needed
E. when the design implements Layer 2 between the access switch and the distribution switch
F. when the design implements Layer 3 between the access switch and the distribution switch
A. map the Layer 2 VLAN number to the Layer 3 subnet
B. control route propagation to edge switches using distribute lists
C. use a Layer 2 distribution interconnection link with HSRP or GLBP
D. use a Layer 3 distribution interconnection link with HSRP or GLBP
E. use equal-cost Layer 3 load balancing on all links to limit the scope of queries in EIGRP
A. It will only become active after a software failure.
B. It will only become active after a hardware failure.
C. It requires that Cisco NSF be enabled in order to work successfully.
D. It synchronizes the MAC, FIB, and adjacency tables between Active and Standby Route Processors.
A. Utilizing Cisco NSF in Layer 2 environments can reduce outages to one to three seconds.
B. Utilizing SSO in Layer 3 environments can reduce outages to one to three seconds.
C. Distribution switches are single points of failure causing outages for the end devices.
D. Utilizing Cisco NSF and SSO in a Layer 2 environment can reduce outages to less than one second.
E. NSF and SSO with redundant supervisors have the most impact on outages at the access layer.
最新試題
Client traffic is being bridged through LAN interfaces on two WLCs. Which roaming option will keep them on the same IP subnet?（）
Which technology allows centralized storage services to be shared across different VSANs?（）
What will an Easy VPN hardware client require in order to insert its protected network address when it connects using network extension mode?（）
How many channels are defined in the IEEE 802.11b DSSS channel set?（）
Which of these is a benefit of using Network Admission Control instead of Cisco Identity Based Networking Services?（）
What is the recommended radius of a cell for a voice-ready wireless network?（）
Which signal and noise values will result in the best phone communication with an access point?（）
Please match the Cisco STP enahancement term to its definition.（）(1) BPDU guard(2) PortFast(3) BackboneFast(4) Loop guard(5) Root guard(a) shuts down a port that receives a BPDU when enabled(b) cuts convergence time by mas-age for indirect failure(c) prevents the aliernate or root port from being designated in absence of BPDUs(d )causes Layer 2 LAN interface access port to immediately enter the forwarding state(e) helps prevent bridging loops due to jni-directional link failures on point-to-point links
You are the Cisco Network Designer. Which of these is least important when determining how many users a NAS can support?（）
Which three of these are important when determining NAS Server scaling? （）