單項選擇題What is a limitation of implementing uRPF?()

A.MPLS LDP must be enabled.
B.BGP routing protocol must be running.
C.Named access-lists must be configured.
D.Symmetrical routing is required.
E.Domain name must be defined


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題The above bgp configuration has what effect on the configured router?()

A.Allows incoming TCP connections destined to port 179
B.Allows incoming TCP connections sourced from port 179
C.Allows incoming TCP connections from 1.1.1.1 and destined to,or sourced from port 179
D.Allows incoming TCP connections from 1.1.1.1 that are destined to port 179
E.Allows incoming TCP connections from 1.1.1.1 that are sourced from port 179

2.多項選擇題Which two are characteristics of an IPv6 multicast address?()

A.First (most significant ) octet is FF in hex
B.Starts with a prefix of FE80 to FEBF in hex
C.Starts with a prefix of FECO to FEFF in hex
D.Second octet contains a 4-bit multicast scope field
E.Last 64 bit contains the modified MAC address of the Ethernet interface
F.Is allocated from the unicast address space

3.多項選擇題n the case of Ethernet transport, which two types of attachment circuits does L2TPv3 support? ()

A.port tunneling on the Ethernet subinterface
B.VLAN tunneling on the Ethernet trunk
C.port tunneling on the Ethernet interface
D.VLAN tunneling on the Ethernet VLAN subinterface
E.port tunneling on the Ethernet trunk

4.多項選擇題Packed Cell Relay encapsulation with AToM inclues which of the following?()

A.Tunnel label
B.VC-label
C.5-byte ATM header
D.Payload
E.4 byte ATM header
F.Support for 30 packed cells

5.多項選擇題Which are correct descriptions and configurations of Anycast RP?()

A.In Anycast RP, two or more RPs are configured with the same IP address on loopback interfaces.
B.Anycast RP provides redundancy and load-sharing capabilities.
C.Routers with Anycast RP can be configured statically (loopback 1.1.1.1)with the command ip pim rp-address 1.1.1.1
D.Routers with Anycast RP can be configured statically (loopback 1.1.1.1)with the command ip rp-address pim 1.1.1.1
E.Routers with Anycast RP can be configured statically (loopback 1.1.1.1)with the command ip anycast-rp pim 1.1.1.1

最新試題

Which statement about implementing the Cisco IPv6 provider Edge Router over MPLS is true?()

題型:單項選擇題

Which of the following is used to periodically multicast by DIS on a LAN to ensure IS-IS link state databaseaccuracy?()

題型:單項選擇題

All secure domain routers (SDRs) have shared attribute and resources. Which three resources are sharedall SDRs? ()

題型:多項選擇題

Which two statements about 10 Gigabit Ethernet (10GE) are true?()

題型:多項選擇題

Two islands of IPv6 networks that are running ISIS (IPv6 IGP) must be connected using a tunnel over anIPv4 network. Which tunneling method can be used to achieve this goal?()

題型:單項選擇題

Which statement about the use of Route Target Rewrite is true?()

題型:單項選擇題

In the Carrier Supporting Carrier (CsC) feature, which two protocols run between CSC-PE and CSC-CE().

題型:多項選擇題

Which Modular QoS CLI (MQC) based output queuing method is designed to support multiple trafficclasses including VoIP traffic, mission-critical traffic, interactive traffic, and default class traffic?()

題型:單項選擇題

Which four statements about Ethernet virtual circuit (EVC) infrastructure are true? ()

題型:多項選擇題

Which two statements about Layer 3 MPLS VPN are true?()

題型:多項選擇題