A.The source must send a PIM Register message to the rendezvous point （RP）.
B.The source must first join the multicast group using IGMP before sending.
C.The source must perform a Request to Send （RTS） and Clear to Send （CTS） handshake with the PIM designated router （DR）.
D.No control plane signaling needs to be performed； the source can simply begin sending on the local subnet.
您可能感興趣的試卷
你可能感興趣的試題
A.It is used only for directly connected subnets or aggregate routes
B.It can only be used with LDP.
C.It is only used when two or more labels are stacked.
D.It enables the Edge LSR to request a label pop operation from Its upstream neighbors
E.It is requested through TDP using a special label value that is also called the implicit-null value.
F.It is requested through LDP using a special label value that is also called the implicit-null value.
A.prefixes received from any other BGP peer and prefixes locally originated via network statements or redistributed
B.all prefixes in its routing table
C.prefixes received from EBGP peers and prefixes locally originated via network statements or redistributed
D.prefixes received from EBGP peers and prefixes received from route reflectors
E.prefixes received from other IBGP peers， prefixes received from EBGP peers，and prefixes redistributedto BGP
F.prefixes received from other IBGP peers and prefixes received from route reflectors
A.dropper
B.classifier
C.marker
D.querier
E.meter
F.shaper
A.data marked with DSCP AF21，VOIP marked with DSCP EF
B.data marked with DSCP AF51，VOIP marked with DSCP EF
C.data marked with the DE-bit. VOIP marked with the CLP-bit
D.data marked with DSCP EF，VOIP marked with DSCP AF31
E.data marked with IP precedence 5，VOIP marked with DSCP EF
A.mark VOIP traffic with IP precedence 6 and configure only fair-queue’ on the links
B.configure the scheduler allocate 3000 1000 command to allow the OoS code to have enough CPU cycles
C.enable class-based traffic shaping on the VOIP traffic class
D.enable Layer 2 fragmentation and interleaving on the links
E.enable Frame Relay on the links and send voice and data on different Frame Relay PVCs
最新試題
On the basis of the network provided in the exhibit， all routers are configured to run EIGRP on all links. If the link between PG-R1 and PG-R2 fails， what is the maximum number of queries PG-R3 will receive for 192.168.1.0/24， assuming that all the packets sent during convergence are transmitted once （there are no dropped or retransmitted packets）？（）
In Layer 2 topologies， spanning-tree failures can cause loops in the network. These unblocked loops cancause network failures because of excessive traffic. Which two Catalyst 6500 features can be used to limitexcessive traffic during spanning-tree loop conditions？（）
How does an IPv6 router deal with a packet that is larger than the outgoing interface MTU？（）
Which message type is constructed and sent from an MSDP router to its MSDP peers when it receives a PIM register message knowing that the MSDP router is also configured as an RP for the PIM domain？（）
All of these are fundamental building blocks of differentiated services Traffic Conditioner Block exceptwhich one？（）
Which of these best describes the actions taken when a VTP message is received on a switch configuredwith the VTP mode "transparent"？（）
Which two statements about SA caching are true？（）
Which command is used to enable SSM with the range 232.0.0.0 - 255.0.0.0？（）
What is the correct command to set the router ID for an OSPFv3 process？（）
Which of these statements about penultimate hop popping are true？（）