在R2的BGP里面:network 198.16.0.0/16 network 10.1.1.0/19 network 10.1.1.0/24.在R1上要求只收:10.1.1.0/19的路由。請選擇在R1上面的哪個配置是正確的:
1.access-list 100 permit ip 10.1.0.0 0.0.0.255 host 255.255.224.0
Router bgp 1
Distribute-list 100 in
2.access-list 10 permit 10.1.0.0 0.0.31.0
您可能感興趣的試卷
你可能感興趣的試題
A.data marked with DSCP AF21,VOIP marked with DSCP EF
B.data marked with DSCP AF51,VOIP marked with DSCP EF
C.data marked with the DE-bit,VOIP marked with the CLP-bit
D.data marked with DSCP EF,VOIP marked with DSCP AF31
E.data marked with IP precedence 5 VOIP marked with DSCP EF
A.mark VOIP traffic with IP precedence 6 and configure only ’fair-queue’ on the links
B.configure the scheduler allocate 3000 1000 command to allow the QoS code to have enough CPU cycles
C.enable class-based traffic shaping on the VoIP traffic class
D.enable Layer 2 fragmentation and interleaving on the links
E.enable Frame Relay on the links and send voice and data on different Frame Relay PVCs
A.Guaranteed PHB
B.Class-Selector PHB
C.Reserved Forwarding PHB
D.Discard Eligible PHB
E.Priority PHB
A.with traffic shaping,a router stores excess traffic in packet buffers until bandwidth is available again
B.with policing you can tune the buffer usage for traffic exceeding the specified CIR
C.with shaping you can tune the buffer usage for traffic exceeding the specified CIR
D.shaping should only be applied for ingress traffic,policing only for egress
E.policing uses a token bucket algorithm,shaping uses an SPD algorithm
最新試題
如何實現(xiàn)擁塞避免?
What field in IP packet is used for classification by QOS?
what is the advantage of policing opposite to shaping?
A network administrator is troubleshooting the OSPF configuration of routers R1 and R2.The routers cannot establish an adjacency relationship on their common Ethernet link.The graphic shows the output of the show ip ospf interface e0 command for routers R1 and R2.Based on the information in the graphic,what is the cause of this problem?()
Local Preference?
Which of the following describes the roles of devices in a WAN?()
一堆交換機一個server、一個transpare,問配置prune在哪里配置?
How should arouter that is being used in a Frame Relay network be configured to avoid split horizon issues from preventing routing updates?()
Refer to the exhibit.The network administrator is in acampus building distant from Building B.WANRouter is hosting a newly installed WAN link on interface S0/0.The new link is not functioning and the administrator needs to determine if the correct cable has been attached to the S0/0 interface.How can the administrator accurately verify the correct cable type on S0/0 in the most efficient manner?()
什么問題導致SERVER VTP密碼跟替他交換機VTP密碼不匹配?