Refer to the exhibit.Assume that the routing protocol referenced in each choice below is configured with its default settings and the given routing protocol is running on all the routers. Which two conditional statements accurately state the path that will be chosen between networks 10.1.0.0 and 10.3.2.0 for the routing protocol mentioned? ()
A.If OSPF is the routing protocol, the path will be from R1 to R3 to R4 to R5.
B.If OSPF is the routing protocol, the path will be from R1 to R2 to R5.
C.If OSPF is the routing protocol, the path will be from R1 to R5.
D.If RIPv2 is the routing protocol, the path will be from R1 to R3 to R4 to R5.
E.If RIPv2 is the routing protocol, the path will be from R1 to R5.
您可能感興趣的試卷
你可能感興趣的試題
A.2 through 1001
B.1 through 1001
C.1 through 1002
D.2 through 1005
Refer to the exhibit. SW1 and SW2 have default configurations. What will happen if host 1 sends a broadcast?()
A. Hosts 2, 3, and 4 will receive the broadcast.
B. Hosts 1, 2, 3, and 4 will receive the broadcast.
C. Host 2 and the Fa0/0 interface of R1 will receive the broadcast.
D. Hosts 1, 2 and the Fa0/0 interface of R1 will receive the broadcast.
E. Hosts 1, 2, 3, 4 and interface Fa0/0 of R1 will receive the broadcast.
F. Hosts 2, 3, 4, and interfaces Fa0/0 and Fa0/1 of R1 will receive the broadcast.
A.(config-if)#authentication ppp chap fallback ppp
B.(config-if)#authentication ppp chap pap
C.(config-if)#ppp authentication chap pap
D.(config-if)#ppp authentication chap fallback ppp
A.Bandwidth,Delay,and MTU
B.Bandwidth
C.Bandwidth and MTU
D.Bandwidth , MTU,Reliability,Delay,and Load
Refer to the exhibit. A packet with a source IP address of 192.168.2.4 and a destination IP address of 10.1.1.4 arrives at the HokesB router. What action does the router take?()
A. forwards the received packet out the Serial0/0 interface
B. forwards a packet containing an EIGRP advertisement out the Serial0/1 interface
C. forwards a packet containing an ICMP message out the FastEthernet0/0 interface
D. forwards a packet containing an ARP request out the FastEthernet0/1 interface
最新試題
傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()
在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲写嬖诙嗌賯€廣播域?()
請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()
請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()
在Cisco IOS 設備中,啟動配置文件存儲于何處?()
請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接?()
下列哪些是私有IP 地址的地址范圍?()
請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么?()
要將數據包發送到遠程網絡,應使用哪種設備?()