單項選擇題The network administrator has discovered that the power supply has failed on a switch in the company LAN and that the switch has stopped functioning. It has been replaced with a Cisco Catalyst 2950 series switch. What must be done to ensure that this new switch becomes the root bridge on the network?()

A. Lower the bridge priority number.
B. Change the MAC address of the switch.
C. Increase the VTP revision number for the domain.
D. Lower the root path cost on the switch ports.
E. Assign the switch an IP address with the lowest value.


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題which command allows you to verify the encapsulation type (CISCO OR IETF) for a frame relay link?()

A.show frame-relay map
B.show frame-relay lmi
C.show inter serial
D.show frame-relay pvc

3.單項選擇題What is the alternative notation for the IPV6 address B514:82C3:0000:0000:0029:EC7A:0000:EC72?()

A.B514:82C3:0029::EC7A:0000:EC72
B.B514:82C3:0029:EC7A:EC72
C.B514:82C3::0029:EC7A:0:EC72
D.B514:82C3::0029:EC7A:EC72

4.單項選擇題

The Frame Relay network in the diagram is not functioning properly. What is the cause of the problem?()

A.The Gallant router has the wrong LMI type configured
B.Inverse ARP is providing the wrong PVC information to the Gallant router
C.The S3 interface of the Steele router has been configured with the frame-relay encapsulation ietf command
D.The frame-relay map statement in the Attalla router for the PVC to Steele is not correct
E.The IP address on the serial interface of the Attalla router is configured incorrectly

5.單項選擇題How should a router that is being used in a Frame Relay network be configured to avoid split horizon issues from preventing routing updates?()

A.Configure a separate sub-interface for each PVC with a unique DLCI and subnet assigned to the subinterface B
B.Configure each Frame Relay circuit as a point-to-point line to support multicast and broadcast traffic
C.Configure many sub-interfaces on the same subnet
D.Configure a single sub-interface to establish multiple PVC connections to multiple remote router interfaces

最新試題

請參見圖示。公司路由器由于故障被更換。更換路由器之后,Education 辦公室內的主機C 和D 能夠相互ping 通,但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()

題型:?jiǎn)雾?xiàng)選擇題

何時必須使用clock rate 命令配置路由器串行接口?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。下列哪組設備僅包含中間設備?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()

題型:?jiǎn)雾?xiàng)選擇題

下列哪些是私有IP 地址的地址范圍?()

題型:多項選擇題

請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時,它的目的MAC 地址是什么?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。哪種邏輯拓?fù)涫菍?duì)圖示網絡的準確描述?()

題型:?jiǎn)雾?xiàng)選擇題

OSI 哪一層可提供有序的數據重構服務?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()

題型:?jiǎn)雾?xiàng)選擇題