單項選擇題

Refer to the exhibit.HostA cannot ping HostB.Assuming routing is properly configured,what could be thecause of this problem?()

A.HostA is not on the same subnet as its default gateway
B.The address of SwitchA is a subnet address
C.The Fa0/0 interface on RouterA is on a subnet that cannot be used
D.The serial interfaces of the routers are not on the same subnet
E.The Fa0/0 interface on RouterB is using a broadcast address


您可能感興趣的試卷

你可能感興趣的試題

2.單項選擇題A network administrator wants to add a line to an access list that will block only Telnet access by the hosts on subnet 192.168.1.128/28 to the server at 192.168.1.5. What command should be issued to accomplish this task?()

A.access-list 101 deny tcp 192.168.1.128 0.0.0.15 192.168.1.5 0.0.0.0 eq 23  access-list 101 permit ip any any
B.access-list 101 deny tcp 192.168.1.128 0.0.0.240 192.168.1.5 0.0.0.0 eq 23  access-list 101 permit ip any any
C.access-list 1 deny tcp 192.168.1.128 0.0.0.255 192.168.1.5 0.0.0.0 eq 21  access-list 1 permit ip any any
D.access-list 1 deny tcp 192.168.1.128 0.0.0.15 host 192.168.1.5 eq 23  access-list 1 permit ip any any


3.單項選擇題Which spread spectrum technology does the 802.11b standard define foroperation?()

A.IR
B.DSSS
C.FHSS
D.DSSS and FHSS
E.IR,F(xiàn)HSS,and DSSS

5.單項選擇題Refer to the exhibit,a network administrator cannot establish a telnet session with the indicated router.What is the cause of this failure?()

A.A level 5 password is not set
B.The vty password is missing
C.The console password is missing
D.An ACL is blocking Telnet access

最新試題

OSI 哪一層可提供有序的數據重構服務?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。公司路由器由于故障被更換。更換路由器之后,Education 辦公室內的主機C 和D 能夠相互ping 通,但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()

題型:?jiǎn)雾?xiàng)選擇題

何時必須使用clock rate 命令配置路由器串行接口?()

題型:?jiǎn)雾?xiàng)選擇題

OSI 模型的哪兩項功能在第2層實現?()

題型:多項選擇題

在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()

題型:多項選擇題

請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€(gè)邏輯地址范圍?()

題型:?jiǎn)雾?xiàng)選擇題

要將數據包發送到遠程網絡,應使用哪種設備?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()

題型:多項選擇題