A.Create an additional ACL to block the access to VLAN 1.
B.Move the management VLAN to something other than default.
C.Move all ports to another VLAN and deactivate the default VLAN.
D.Limit the access in the switch using port security configuration.
E.Use static VLAN in trunks and access ports to restrict connections.
F.Shutdown all unused ports in the Catalyst switch.
您可能感興趣的試卷
你可能感興趣的試題
Your boss is learning a CCNA training course,refer to the exhibit.The access list has been configured on the S0/0 interface of router RTB in the outbound direction.Which two packets,if routed to the interface,will be denied?()
access-list 101 denytcp192.168.15.320.0.0.15any eq telnet
access-list 101 permitip any any
A.source ip address:192.168.15.5;destination port: 21
B.source ip address:,192.168.15.37 destination port: 21
C.source ip address:,192.168.15.41 destination port: 21
D.source ip address:,192.168.15.36 destination port: 23
E.source ip address:192.168.15.46;destination port: 23
F.source ip address:,192.168.15.49 destination port: 23
A.Host 1 addresses the frames to the MAC address of router R1
B.Host 1 looks in its ARP cache for the MAC address of router R1
C.Host 1 addresses the frames to the MAC address of web server 2
D.Host 1 sends the packets to router R1 to be forwarded to web server 2
E.Host 1 sends a broadcast ARP request to obtain the MAC address of webserver2
A.reflexive
B.extended
C.standard
D.dynamic
A.they offer simpler management in large internetworks.
B.you can control logging messages.
C.they allow packets to be filtered based on upper-layer session information.
D.you can set a time-based security policy.
E.they provide a level of security against spoofing.
F.they are used to authenticate individual users
Refer to the exhibit.Which two statements are true of the interfaces on switch1?()
A.A hub is connected directly to FastEthernet0/5
B.FastEthernet0/1 is configured as a trunk link.
C.FastEthernet0/5 has statically assigned mac address
D.Interface FastEthernet0/2 has been disable.
E.Multiple devices are connected directly to FastEthernet0/1.
F.FastEthernet0/1 is connected to a host with multiple network interface cards.
最新試題
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€邏輯地址范圍?()
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()
請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()
請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接?()
請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么?()
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()
何時必須使用clock rate 命令配置路由器串行接口?()
下列哪些是私有IP 地址的地址范圍?()
請參見圖示。當計算機A 向計算機D 發送幀時,哪些計算機會接收該幀?()
請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()