單項選擇題Hosts on the same VLAN can communicate with each other but are unable to communicate with hosts on different VLANs. What is needed to allow communication between VLANs()。

A.a switch with a trunk link that is configured between the switches
B.a router with an IP address on the physical interface that is connected to the switch
C.a switch with an access link that is configured between the switches
D.a router with subinterfaces configured on the physical interface that is connected to the switch


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題There are no boot system commands in a router configuration in NVRAM.What is the fall back sequence that router will use to find an ios during reload?()

A.Flash,TFTPserver,ROM
B.Flash,NVRAM,ROM
C.ROM,NVRAM,TFTPserver
D.NVRAM,TFTPserver,ROM
E.TFTPserver,F(xiàn)lash,NVRAM

2.單項選擇題

根據下圖,Switch1剛剛完成重啟,并完成上電自檢。HostA發送它的第一個偵到HostC,交換機首先會對switching table做什么操作()

A.Switch1會添加192.168.23.4到switchingtable
B.Switch1添加192.168.23.12到switchingtable
C.Switch1添加000A 8A47.E612到switchingtable
D.Switch1添加000B DB95.2EE9到switchingtable

3.單項選擇題哪種擴頻技術是802.11B定義使用的?()

A.IR
B.DSSS
C.FHSS
D.DSSS and FHSS
E.IR,F(xiàn)HSS,and DSSS

4.單項選擇題What is the effect of the following access list condition access-list 101 permit ip 10.25.30.0 0.0.0.255 any()。

A.permit all packets matching the first three octets of the source address to all destinations
B.permit all packets matching the last octet of the destination address and accept all source addresses
C.permit all packets from the third subnet of the network address to all destinations
D.permit all packets matching the host bits in the source address to all destinations
E.permit all packets to destinations matching the first three octets in the destination address

5.單項選擇題Which IPV6 routing protocol uses multicast group FF02::9 to send updates?()

A.RIPng
B.OSPFv3
C.static
D.IS-ISfor IPv6

最新試題

請參見圖示。對于從主機A 向Web 服務器發出的網頁請求,正確的目的套接字?jǐn)?shù)字是什么?()

題型:單項選擇題

路由器使用哪一項信息來確定源主機和目的主機之間的路徑?()

題型:單項選擇題

請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()

題型:單項選擇題

在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()

題型:單項選擇題

要將數據包發送到遠程網絡,應使用哪種設備?()

題型:單項選擇題

請參見圖示。下列哪組設備僅包含中間設備?()

題型:單項選擇題

請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet??梢詾槁酚善鹘涌赟0/0/0分配下列哪一個IP 地址?()

題型:單項選擇題

請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()

題型:單項選擇題

請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()

題型:單項選擇題

OSI 哪一層可提供有序的數據重構服務?()

題型:單項選擇題