單項選擇題

pany uses MSTP within their switched LAN. 
What is the main purpose of Multiple Instance  Spanning Tree Protocol (MSTP)?()

A. To enhance Spanning Tree troubleshooting on multilayer switches
B. To reduce the total number of spanning tree instances necessary for a particular topology 
C. To provide faster convergence when topology changes occur in a switched network
D. To provide protection for STP when a link is unidirectional and BPDUs are being sent but not  received
E. None of the other alternatives apply


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題

The Company network utilizes the Multiple-instance Spanning Tree protocol in its switched LAN. 
 Which three statements about the MST protocol (IEEE 802.1S) are true? ()

A. To verify the MST configuration, the show pending command can be used in MST configuration  mode.
B. When RSTP and MSTP are configured; UplinkFast and BackboneFast must also be enabled.
C. All switches in the same MST region must have the same VLAN-to-instance mapping, but  different configuration revision numbers.
D. All switches in an MST region, except distribution layer switches, should have their priority  lowered from the default value 32768.
E. An MST region is a group of MST switches that appear as a single virtual bridge to adjacent  CST and MST regions.
F. Enabling MST with the "spanning-tree modemst" global configuration command also enables  RSTP.

2.單項選擇題

On switch R1 you issue the "udld enable" global command. 
What does this command accomplish? ()

A. Enables all fiber-optic LAN ports for Unidirectional LINK Detection (UDLD)
B. Enables all copper media LAN ports Unidirectional Link Detection (UDLD)
C. Overrides the default UDLS setting for all ports
D. Globally enables all ports on the device for Unidirectional Link Detection (UDLS)
E. None of the other alternatives apply

3.單項選擇題

Switch R1 has been configured with the root guard feature. 
What statement is true if the spanning  tree enhancement Root Guard is enabled? ()

A. If BPDUs are not received on a non-designated port, the port is moved into the STP loop- inconsistent blocked state
B. IF BPDUs are received on a PortFast enabled port, the port is disabled.
C. If superior BPDUs are received on a designated port, the interface is placed into the root- inconsistent blocked state.
D. If inferior BPDUs are received on a root port, all blocked ports become alternate paths to the  root bride.

4.多項選擇題

You are the network administrator tasked with designing a switching solution for the Company  network. 
Which of the following statements describing trunk links are INCORRECT?()

A. The trunk link belongs to a specific VLAN.
B. Multiple trunk links are used to connect multiple end user devices.
C. A trunk link only supports native VLAN.
D. Trunk links use 802.10 to identify a VLAN.
E. The native VLAN of the trunk link is the VLAN that the trunk uses for untagged packets.

5.多項選擇題

ISL is being configured on a Company switch. 
Which of the following choices are true regarding  the ISL protocol? ()

A. It can be used between Cisco and non-Cisco switch devices.
B. It calculates a new CRC field on top of the existing CRC field.
C. It adds 4 bytes of protocol-specific information to the original Ethernet frame.
D. It adds 30 bytes of protocol-specific information to the original Ethernet frame.

最新試題

Refer to the exhibit. What command was issued on the Layer 3 switch Sw1 between Exhibit #1 and Exhibit #2?()

題型:單項選擇題

During routine maintenance, G1/0/1 on DS1 was shutdown. All other interface were up. DS2 became the active HSRP device for Vlan101 as desired. However, after G1/0/1 on DS1 was reactivated. DS1 did not become the active HSRP device as desired. What need to be done to make the group for Vlan101 function properly ? ()

題型:單項選擇題

Which router redundancy protocol cannot be configured for interface tracking?()

題型:單項選擇題

Refer to the exhibit. For what purpose is the command show ip cef used?()

題型:單項選擇題

Refer to the exhibit. Switch 15 is configured as the root switch for VLAN 10 but not for VLAN 20. If the STP configuration is correct, what will be true about Switch 15?()

題型:單項選擇題

Examine the diagram. A network administrator has recently installed the above switched network using 3550s and would like to control the selection of the root bridge.Which switch should theadministrator configure as the root bridge and which configuration command must theadministrator enter to accomplish this?()

題型:單項選擇題

How are STP timers and state transitions affected when a topology change occurs in an STP environment?()

題型:單項選擇題

Refer to the exhibit. What does the command channel-group 1 mode desirable do? () 

題型:單項選擇題

DS2 has not become the active device for Vlan103’s HSRP group even though all interfaces are active. As related to Vlan103’s HSRP group. What can be done to make the group function properly ? ()

題型:單項選擇題

What is the configured priority value of the Vlan105’s group on DS2 ?()

題型:單項選擇題